1633-LH Coaxlink Quad G3 LH Properties Sheet
1633-LH Coaxlink Quad G3 LH product properties
| Property description | Property value |
|---|---|
| Complies with EU REACH Regulation (EC) No 1907/2006 | REACH |
| Complies with EU/2015/863 (RoHS) of the 2011/65/EU directive | RoHS |
| Product code and name | 1633-LH Coaxlink Quad G3 LH |
| Product code | 1633-LH |
| Product name | Coaxlink Quad G3 LH |
| Serial nr. prefix | KQH |
| Documentation section title (landing page) | Frame Grabbers |
| Product driver | eGrabber |
| Product series | Coaxlink |
| Product sub-series | CXP-6 |
| Product group | 1633 |
| On-board DRAM memory capacity [Megabyte] | 1024 |
| PCI Express revision number | 3 |
| Number of PCI express lanes | 4 |
| PCI interface type | 4-lanes PCI Express Gen3 |
| PCI Express card profile | Standard |
| PCB platform name | KOALA-II |
| PCIe standard compliance deviation | PCIe standard compliance deviation - Operate only at PCIe 2.0 and PCIe 3.0 link speeds |
| Camera interface standard | CoaXPress |
| Camera interface physical layer | 6 Gbit/s CoaXPress |
| Camera interface connector(s) type | DIN-4 |
| Camera powering over cable | PoCXP |
| Auxiliary 12 V power input usage | 4 POCXP + I/O power output |
| PCI Express +3.3 V typical input power [Watt] | 3.8 |
| PCI Express +12 V typical input power [Watt] | 13 |
| Cooling method | Fanless heatsink |
| Length [mm] | 167.65 |
| Length [in] | 6.6 |
| Width [mm] | 111.15 |
| Width [in] | 4.38 |
| Weight [g] | 265 |
| Weight [oz] | 9.35 |
| Environmental storage conditions | Standard |
| Environmental operating conditions | Standard 0°C-55°C | 80°C max FPGA temperature | 250 lfm min. airflow |
| EMC compliance for Europe | EN55022/32 Class B emission | EN55024/35 immunity |
| EMC compliance for US | Class B emission |
| KC Compliance registration number | MSIP-REM-EUr-PC1633 |
| Camera interface LEDs | CoaXPress LED's on bracket |
| Differential input lines type | Version 1 |
| TTL input/output lines type | Version 1 |
| Isolated input lines type | Version 1 (50 kHz) |
| Isolated output lines type | Standard |
| Number of standard GPIO sets | 2 |
| Compatible with 1625 DB25F I/O Adapter Cable | TRUE |
| Compatible with 1636 InterPC C2C-Link Adapter | TRUE |
| Compatible with 1636 InterPC C2C-Link Adapter for Inter-PC C2C-link extension purpose | TRUE |
| Compatible with 1636 InterPC C2C-Link Adapter for HD26F I/O adapter purpose | TRUE |
| Compatible with 1636 InterPC C2C-Link Adapter for HD26F I/O adapter purpose with Internal I/O2 | TRUE |
| Compatible with 3303 C2C-Link Ribbon Cable | TRUE |
| Compatible with 3304 HD26F I/O Adapter Cable | TRUE |
| Compatible with 3304 HD26F I/O Adapter Cable on Internal IO2 connector | TRUE |
| Camera connector instance | inst120 |
| External I/O connector instance | inst200 |
| Internal I/O connector instance | inst300 |
| Second internal I/O connector instance | inst310 |
| C2C-Link connector instance | inst400 |
| Power connector | inst500 |
Coaxlink Quad G3 (1-camera) firmware variant properties
| Property description | Property value |
|---|---|
| Firmware variant name | Coaxlink Quad G3 (1-camera) |
| Firmware variant tag: camera count | 1-camera |
| Firmware variant tag: camera type | Area-scan |
| HCMAP (Host Connection MAP) | 1D4 |
| HCMAP description | One 1- or 2- or 4-connection |
| HCMAP - Device count field | 1 |
| HCMAP - Connection(s) per device field | 4C |
| HCMAP - Stream count field | 1S |
| Flat-field correction pixel processing | FFC |
| Lookup-table pixel processing | LUT |
| CFA Pixel processing is available | CFA decoding - Methods 1 and 2 |
| CFA decoding method 1 | TRUE |
| CFA decoding method 2 | TRUE |
| CFA peak pixel processing rate per stream | 1,108,000,000 pixels/s |
| CFA maximum line length [pixels] | 16384 |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 1 |
| I/O toolbox Multiplier/Divider tools count | 1 |
| I/O toolbox C2C-Link Synchronization tools count | 2 |
| Image acquisition type | Area-scan |
| Maximum number of CIC cycle timings | 16 |
| Default width-increment step [Byte] | 4 |
| Width-increment step when CFA decoder is active [Byte] | 16 |
| Width-increment step when FFC corrector is active [Byte] | 16 |
Coaxlink Quad G3 (1-camera, 4-data-stream) firmware variant properties
| Property description | Property value |
|---|---|
| Firmware variant name | Coaxlink Quad G3 (1-camera, 4-data-stream) |
| Firmware variant tag: camera count | 1-camera, 4-data-stream |
| Firmware variant tag: camera type | Area-scan |
| HCMAP (Host Connection MAP) | 1D4 |
| HCMAP description | One 1- or 2- or 4-connection |
| HCMAP - Device count field | 1 |
| HCMAP - Connection(s) per device field | 4C |
| HCMAP - Stream count field | 4S |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 1 |
| I/O toolbox Multiplier/Divider tools count | 1 |
| I/O toolbox C2C-Link Synchronization tools count | 2 |
| Image acquisition type | Area-scan |
| Maximum number of CIC cycle timings | 1 |
| Multi-stream acquisition | true |
| Default width-increment step [Byte] | 4 |
Coaxlink Quad G3 (1-camera, line-scan) firmware variant properties
| Property description | Property value |
|---|---|
| Firmware variant name | Coaxlink Quad G3 (1-camera, line-scan) |
| Firmware variant tag: camera count | 1-camera, line-scan |
| Firmware variant tag: camera type | Line-scan |
| HCMAP (Host Connection MAP) | 1D4 |
| HCMAP description | One 1- or 2- or 4-connection |
| HCMAP - Device count field | 1 |
| HCMAP - Connection(s) per device field | 4C |
| HCMAP - Stream count field | 1S |
| Flat-field correction pixel processing | FFC |
| Lookup-table pixel processing | LUT |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 1 |
| I/O toolbox Multiplier/Divider tools count | 1 |
| I/O toolbox C2C-Link Synchronization tools count | 3 |
| Image acquisition type | Line-scan |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
| Width-increment step when FFC corrector is active [Byte] | 16 |
Coaxlink Quad G3 (1-slm-camera) firmware variant properties
| Property description | Property value |
|---|---|
| Firmware variant name | Coaxlink Quad G3 (1-slm-camera) |
| Firmware variant tag: camera count | 1-slm-camera |
| Firmware variant tag: camera type | Area-scan |
| HCMAP (Host Connection MAP) | 1D8SLM4 |
| HCMAP description | Master 4-connection sub-link of an 8-connection |
| HCMAP - Device count field | 1 |
| HCMAP - Connection(s) per device field | 4of8C |
| HCMAP - Stream count field | 1S |
| Lookup-table pixel processing | LUT |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 1 |
| I/O toolbox Multiplier/Divider tools count | 1 |
| I/O toolbox C2C-Link Synchronization tools count | 2 |
| Image acquisition type | Area-scan |
| Maximum number of CIC cycle timings | 1 |
| Sub-link acquisition | true |
| Default width-increment step [Byte] | 4 |
Coaxlink Quad G3 (1-sls-camera) firmware variant properties
| Property description | Property value |
|---|---|
| Firmware variant name | Coaxlink Quad G3 (1-sls-camera) |
| Firmware variant tag: camera count | 1-sls-camera |
| Firmware variant tag: camera type | Area-scan |
| HCMAP (Host Connection MAP) | 1D8SLS4 |
| HCMAP description | Slave 4-connection sub-link of an 8-connection |
| HCMAP - Device count field | 1 |
| HCMAP - Connection(s) per device field | 4of8C |
| HCMAP - Stream count field | 1S |
| Lookup-table pixel processing | LUT |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 1 |
| I/O toolbox Multiplier/Divider tools count | 1 |
| I/O toolbox C2C-Link Synchronization tools count | 3 |
| Image acquisition type | Line-scan |
| Maximum number of CIC cycle timings | 1 |
| Sub-link acquisition | true |
| Default width-increment step [Byte] | 4 |
Coaxlink Quad G3 (2-camera) firmware variant properties
| Property description | Property value |
|---|---|
| Firmware variant name | Coaxlink Quad G3 (2-camera) |
| Firmware variant tag: camera count | 2-camera |
| Firmware variant tag: camera type | Area-scan |
| HCMAP (Host Connection MAP) | 2D22 |
| HCMAP description | One or two 1- or 2-connection |
| HCMAP - Device count field | 2 |
| HCMAP - Connection(s) per device field | 2C |
| HCMAP - Stream count field | 1S |
| Lookup-table pixel processing | LUT |
| CFA Pixel processing is available | CFA decoding - Methods 3 and 5 on Device0 |
| CFA decoding method 3 | Device0 only |
| CFA decoding method 5 | Device0 only |
| CFA peak pixel processing rate per stream | 1,000,000,000 pixels/s |
| CFA maximum line length [pixels] | 8192 |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 2 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 2 |
| I/O toolbox Multiplier/Divider tools count | 2 |
| I/O toolbox C2C-Link Synchronization tools count | 2 |
| Image acquisition type | Area-scan |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
Coaxlink Quad G3 (2-camera, bayer) firmware variant properties
| Property description | Property value |
|---|---|
| Firmware variant name | Coaxlink Quad G3 (2-camera, bayer) |
| Firmware variant tag: camera count | 2-camera, bayer |
| Firmware variant tag: camera type | Area-scan |
| HCMAP (Host Connection MAP) | 2D22 |
| HCMAP description | One or two 1- or 2-connection |
| HCMAP - Device count field | 2 |
| HCMAP - Connection(s) per device field | 2C |
| HCMAP - Stream count field | 1S |
| CFA Pixel processing is available | CFA decoding - Methods 3 and 5 |
| CFA decoding method 3 | TRUE |
| CFA decoding method 5 | TRUE |
| CFA peak pixel processing rate per stream | 1,000,000,000 pixels/s |
| CFA maximum line length [pixels] | 8192 |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| Image acquisition type | Area-scan |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
Coaxlink Quad G3 (2-camera, line-scan) firmware variant properties
| Property description | Property value |
|---|---|
| Firmware variant name | Coaxlink Quad G3 (2-camera, line-scan) |
| Firmware variant tag: camera count | 2-camera, line-scan |
| Firmware variant tag: camera type | Line-scan |
| HCMAP (Host Connection MAP) | 2D22 |
| HCMAP description | One or two 1- or 2-connection |
| HCMAP - Device count field | 2 |
| HCMAP - Connection(s) per device field | 2C |
| HCMAP - Stream count field | 1S |
| Lookup-table pixel processing | LUT |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 2 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 2 |
| I/O toolbox Multiplier/Divider tools count | 2 |
| I/O toolbox C2C-Link Synchronization tools count | 3 |
| Image acquisition type | Line-scan |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
Coaxlink Quad G3 (3-camera) firmware variant properties
| Property description | Property value |
|---|---|
| Firmware variant name | Coaxlink Quad G3 (3-camera) |
| Firmware variant tag: camera count | 3-camera |
| Firmware variant tag: camera type | Area-scan |
| HCMAP (Host Connection MAP) | 3D211 |
| HCMAP description | One 1- or 2-connection and one or two 1-connection |
| HCMAP - Device count field | 3 |
| HCMAP - Connection(s) per device field | 2C, 1C |
| HCMAP - Stream count field | 1S |
| Lookup-table pixel processing | LUT |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 2 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 2 |
| I/O toolbox Multiplier/Divider tools count | 2 |
| I/O toolbox C2C-Link Synchronization tools count | 2 |
| Image acquisition type | Area-scan |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
Coaxlink Quad G3 (4-camera) firmware variant properties
| Property description | Property value |
|---|---|
| Firmware variant name | Coaxlink Quad G3 (4-camera) |
| Firmware variant tag: camera count | 4-camera |
| Firmware variant tag: camera type | Area-scan |
| HCMAP (Host Connection MAP) | 4D1111 |
| HCMAP description | One or two or three or four 1-connection |
| HCMAP - Device count field | 4 |
| HCMAP - Connection(s) per device field | 1C |
| HCMAP - Stream count field | 1S |
| Lookup-table pixel processing | LUT |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 4 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 4 |
| I/O toolbox Divider tools count | 4 |
| I/O toolbox Multiplier/Divider tools count | 4 |
| I/O toolbox C2C-Link Synchronization tools count | 2 |
| Image acquisition type | Area-scan |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
Coaxlink Quad G3 (4-camera, line-scan) firmware variant properties
| Property description | Property value |
|---|---|
| Firmware variant name | Coaxlink Quad G3 (4-camera, line-scan) |
| Firmware variant tag: camera count | 4-camera, line-scan |
| Firmware variant tag: camera type | Line-scan |
| HCMAP (Host Connection MAP) | 4D1111 |
| HCMAP description | One or two or three or four 1-connection |
| HCMAP - Device count field | 4 |
| HCMAP - Connection(s) per device field | 1C |
| HCMAP - Stream count field | 1S |
| Lookup-table pixel processing | LUT |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 4 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 4 |
| I/O toolbox Divider tools count | 4 |
| I/O toolbox Multiplier/Divider tools count | 4 |
| I/O toolbox C2C-Link Synchronization tools count | 3 |
| Image acquisition type | Line-scan |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |