1635 Coaxlink Quad G3 DF Properties Sheet
1635 Coaxlink Quad G3 DF product properties
| Property description | Property value |
|---|---|
| Complies with EU REACH Regulation (EC) No 1907/2006 | REACH |
| Complies with EU/2015/863 (RoHS) of the 2011/65/EU directive | RoHS |
| Product code and name | 1635 Coaxlink Quad G3 DF |
| Product code | 1635 |
| Product name | Coaxlink Quad G3 DF |
| Serial nr. prefix | KDF |
| Documentation section title (landing page) | Frame Grabbers |
| Product driver | eGrabber |
| Product series | Coaxlink |
| Product sub-series | CXP-6 |
| On-board DRAM memory capacity [Megabyte] | 1024 |
| PCI Express revision number | 3 |
| Number of PCI express lanes | 4 |
| PCI interface type | 4-lanes PCI Express Gen3 |
| PCI Express card profile | Standard |
| PCB platform name | KOALA-IV |
| PCIe standard compliance deviation | PCIe standard compliance deviation - Operate only at PCIe 2.0 and PCIe 3.0 link speeds |
| Camera interface standard | CoaXPress |
| Camera interface physical layer | 6 Gbit/s CoaXPress |
| Camera interface connector(s) type | DIN-4 |
| Camera powering over cable | PoCXP |
| CoaXPress Data Forwarding | Y |
| Auxiliary 12 V power input usage | 4 POCXP + I/O power output |
| PCI Express +3.3 V typical input power [Watt] | 3.8 |
| PCI Express +12 V typical input power [Watt] | 13 |
| Cooling method | Fan-heatsink |
| Length [mm] | 167.65 |
| Length [in] | 6.6 |
| Width [mm] | 111.15 |
| Width [in] | 4.38 |
| Weight [g] | 186 |
| Weight [oz] | 6.56 |
| Environmental storage conditions | Standard |
| Environmental operating conditions | Standard 0°C-55°C | 80°C max FPGA temperature |
| EMC compliance for Europe | EN55022/32 Class A emission | EN55024/35 immunity |
| EMC compliance for US | Class A emission |
| KC Compliance registration number | R-R-EUr-PC1635 |
| Camera interface LEDs | CoaXPress LED's on bracket |
| Differential input lines type | Version 1 |
| TTL input/output lines type | Version 1 |
| Isolated input lines type | Version 1 (50 kHz) |
| Isolated output lines type | Standard |
| Number of standard GPIO sets | 1 |
| Compatible with 1625 DB25F I/O Adapter Cable | TRUE |
| Compatible with 1636 InterPC C2C-Link Adapter | TRUE |
| Compatible with 1636 InterPC C2C-Link Adapter for Inter-PC C2C-link extension purpose | TRUE |
| Compatible with 1636 InterPC C2C-Link Adapter for HD26F I/O adapter purpose | TRUE |
| Compatible with 1636 InterPC C2C-Link Adapter for HD26F I/O adapter purpose with Internal I/O1 | TRUE |
| Compatible with 3303 C2C-Link Ribbon Cable | TRUE |
| Compatible with 3304 HD26F I/O Adapter Cable | TRUE |
| Compatible with 3304 HD26F I/O Adapter Cable on Internal IO1 connector | TRUE |
| Camera connector instance | inst120 |
| Second camera connector instance | inst130 |
| Internal I/O connector instance | inst300 |
| C2C-Link connector instance | inst400 |
| Power connector | inst500 |
Coaxlink Quad G3 DF (1-camera) firmware variant properties
| Property description | Property value |
|---|---|
| Firmware variant name | Coaxlink Quad G3 DF (1-camera) |
| Firmware variant tag: camera count | 1-camera |
| Firmware variant tag: camera type | Area-scan |
| HCMAP (Host Connection MAP) | 1D4 |
| HCMAP description | One 1- or 2- or 4-connection |
| HCMAP - Device count field | 1 |
| HCMAP - Connection(s) per device field | 4C |
| HCMAP - Stream count field | 1S |
| Lookup-table pixel processing | LUT |
| CFA Pixel processing is available | CFA decoding - Methods 1, 2, and 3 |
| CFA decoding method 1 | TRUE |
| CFA decoding method 2 | TRUE |
| CFA decoding method 3 | TRUE |
| CFA peak pixel processing rate per stream | 1,108,000,000 pixels/s |
| CFA maximum line length [pixels] | 16384 |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 1 |
| I/O toolbox Multiplier/Divider tools count | 1 |
| I/O toolbox C2C-Link Synchronization tools count | 2 |
| Image acquisition type | Area-scan |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
| Width-increment step when CFA decoder is active [Byte] | 16 |
Coaxlink Quad G3 DF (1-df-camera) firmware variant properties
| Property description | Property value |
|---|---|
| Firmware variant name | Coaxlink Quad G3 DF (1-df-camera) |
| Firmware variant tag: camera count | 1-df-camera |
| Firmware variant tag: camera type | DF area-scan |
| HCMAP (Host Connection MAP) | 1DF4 |
| HCMAP description | One 1- or 2- or 4-connection |
| HCMAP - Device count field | 1 |
| HCMAP - Connection(s) per device field | 4C |
| HCMAP - Stream count field | 1S |
| Lookup-table pixel processing | LUT |
| CFA Pixel processing is available | CFA decoding - Methods 1, 2, and 3 |
| CFA decoding method 1 | TRUE |
| CFA decoding method 2 | TRUE |
| CFA decoding method 3 | TRUE |
| CFA peak pixel processing rate per stream | 1,108,000,000 pixels/s |
| CFA maximum line length [pixels] | 16384 |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 1 |
| I/O toolbox Multiplier/Divider tools count | 1 |
| I/O toolbox C2C-Link Synchronization tools count | 2 |
| Image acquisition type | Area-scan |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
| Width-increment step when CFA decoder is active [Byte] | 16 |
Coaxlink Quad G3 DF (1-camera, line-scan) firmware variant properties
| Property description | Property value |
|---|---|
| Firmware variant name | Coaxlink Quad G3 DF (1-camera, line-scan) |
| Firmware variant tag: camera count | 1-camera, line-scan |
| Firmware variant tag: camera type | Line-scan |
| HCMAP (Host Connection MAP) | 1D4 |
| HCMAP description | One 1- or 2- or 4-connection |
| HCMAP - Device count field | 1 |
| HCMAP - Connection(s) per device field | 4C |
| HCMAP - Stream count field | 1S |
| Flat-field correction pixel processing | FFC |
| Lookup-table pixel processing | LUT |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 1 |
| I/O toolbox Multiplier/Divider tools count | 1 |
| I/O toolbox C2C-Link Synchronization tools count | 3 |
| Image acquisition type | Line-scan |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
| Width-increment step when FFC corrector is active [Byte] | 16 |
Coaxlink Quad G3 DF (1-df-camera, line-scan) firmware variant properties
| Property description | Property value |
|---|---|
| Firmware variant name | Coaxlink Quad G3 DF (1-df-camera, line-scan) |
| Firmware variant tag: camera count | 1-df-camera, line-scan |
| Firmware variant tag: camera type | DF line-scan |
| HCMAP (Host Connection MAP) | 1DF4 |
| HCMAP description | One 1- or 2- or 4-connection |
| HCMAP - Device count field | 1 |
| HCMAP - Connection(s) per device field | 4C |
| HCMAP - Stream count field | 1S |
| Flat-field correction pixel processing | FFC |
| Lookup-table pixel processing | LUT |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox Event Input tools count | 2 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 1 |
| I/O toolbox Multiplier/Divider tools count | 1 |
| I/O toolbox C2C-Link Synchronization tools count | 3 |
| Image acquisition type | Line-scan |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
| Width-increment step when FFC corrector is active [Byte] | 16 |