Documentation Portal      

What are you looking for?

EqualizationLevel

Channel link equalizer(s) level settings

Parameter Info

Class Category Level Type Access
Channel Grabber Configuration ADJUST Enumerated Set and Get
Num ID String Identifier C, C++ identifier
10667 << 14 EqualizationLevel MC_EqualizationLevel

Parameter Description

The boards featuring ECCO+ are equipped with cable equalizers on the Camera Linl receivers.

The equalizers compensate for the attenuation of the highest frequencies of the signal along the data lines of the Camera Link cable.

The equalizers provide four selectable equalization levels:

OFF: 0 dB - The equalizers are turned off.
LOW: The equalizers compensate for a cable attenuation of 4 dB at 1 GHz.
MEDIUM: The equalizers compensate for a cable attenuation of 8 dB at 1 GHz.
HIGH: The equalizers compensate for a cable attenuation of 16 dB at 1 GHz.

The cable attenuation is proportional to the cable length and to the cable attenuation characteristic. It can be estimated as follows:

attenuation [dB] = cable_length [m] x cable_attenuation_characteristic [dB/m]

Note: An AWG28 twisted pair, commonly found in Camera Link cable assemblies exhibits a typical cable_attenuation_characteristic of 1.4 dB/m

Parameter Usage

Relevance condition(s):

Condition: ECCO+ feature is available

Directive: Select the equalization level according to the actual cable attenuation.

Directive: For AWG28 cables of up to 1 meter, select OFF.

Directive: For AWG28 cables of 1 up to 4 meters, select LOW.

Directive: For AWG28 cables of 4 up to 8 meters, select MEDIUM.

Directive: For AWG28 cables of 8 up to 20 meters, select HIGH.

Parameter Values

OFF

MC_EqualizationLevel_OFF

Description

Equalizers are turned OFF

LOW

MC_EqualizationLevel_LOW

Description

Equalizers are turned ON with a low gain

MEDIUM

MC_EqualizationLevel_MEDIUM

Description

Equalizers are turned ON with a medium gain

HIGH

MC_EqualizationLevel_HIGH

Description

Equalizers are turned ON with a high gain

Default value.

© 2019 EURESYS s.a.  -  About Documentation  -  MultiCam 6.17.0.4035