1624 Grablink Base

Factory default assembly for standard-profile chassis

The 1624 Grablink Base board is fitted at factory with a standard profile bracket having 2 connectors and 2 LED indicators:

● The upper connector, called External I/O Connector, is for system connection, such as external trigger, illumination control or motion encoder.
● The lower connector, called Camera Link Connector, is for the connection of a Camera Link Base camera. It complies with the Camera Link standard Shrunk Delta Ribbon - SDR - connector and supports PoCL.
● At the lowest end, the LED Indicators report board and acquisition status.

The 1624 Grablink Base board is fitted, at factory exit, with 2 internal connectors:

● The Internal I/O Connector is for system connection, such as external trigger, illumination control or motion encoder. It is connected to the External I/O Connector with a flat cable.
● The Power Input Connector is for powering the camera through PoCL and powering system devices through the I/O connectors.

Alternate assembly for low-profile chassis

1624 Grablink Base comes with two parts: a standard-profile board assembly (board + standard-profile bracket) and an extra low-profile bracket.

The standard-profile board assembly can be converted into a low-profile board assembly by exchanging the original bracket with the low-profile bracket.Therefore , remove the original standard-profile bracket by using a flat screwdriver, and re-install the screw locks of the Camera Link connector.

The low-profile bracket has 1 connector and 2 LED indicators:

● The connector, called Camera Link Connector , is for the connection of a Camera Link Base camera. It complies with the Camera Link standard Shrunk Delta Ribbon - SDR - connector and supports PoCL.
● At the lowest end, the LED Indicators report board and acquisition status.

The 1624 Grablink Base board is fitted, with 2 internal connectors:

● The Internal I/O Connector is for system connection, such as external trigger, illumination control or motion encoder.
● The Power Input Connector is for powering the camera through PoCL and powering system devices through the I/O connectors.