LineTrigLine
Designation of line trigger hardware line from outside system
Parameter Info
| Class | Category | Level | Type | Access |
|---|---|---|---|---|
| Channel | Encoder Control | EXPERT | Enumerated | Set and Get |
| Num ID | String Identifier | C, C++ identifier |
|---|---|---|
| 1334 << 14 | LineTrigLine | MC_LineTrigLine |
Parameter Description
This parameter designates the terminal sensing the line trigger pulse. The line trigger pulse is processed by the grabber and transferred to the camera as the line reset pulse. Usually, this line trigger signal is generated by a motion encoder.
The LineTrigLine parameter designates where the line trigger pulse usually issued by a motion encoder should be applied.
Parameter Values
NOM
| MC_LineTrigLine_NOM |
|---|
|
Description
The encoder trigger line is found on the System connector at the nominal terminal pin, according to the LineTrigCtl value. When LineTrigCtl = TTL, the relevant trigger line is TRG. When LineTrigCtl = ITTL or I12V, the relevant trigger line is A1. |
|
Description
The encoder trigger line is found on the System connector at the nominal terminal pin, according to the LineTrigCtl value. When LineTrigCtl = LVDS, the relevant trigger line is the differential input pair TRA2. When LineTrigCtl = TTL, the relevant trigger line is Enhanced IO2. When LineTrigCtl = ITTL or I12V, the relevant trigger line is ISOA2. |
|
Description t designates the DIN1 line when LineTrigCtl =DIFF, the DIN1 and DIN2 pair of differential lines when LineTrigCtl =DIFF_PAIRED, the IIN1 line when LineTrigCtl =ISO, the IIN1 and IIN2 pair of differential lines when LineTrigCtl =ISO_PAIRED. |
|
Default value. |
|
Applicability condition(s)
Condition: LineTrigCtl is set to DIFF, DIFF_PAIRED, ISO, or ISO_PAIRED. |
TRG
| MC_LineTrigLine_TRG |
|---|
|
Description The encoder trigger line is found on the System connector at the terminal TRG. |
|
Applicability condition(s) Condition: LineTrigCtl is set to TTL. |
CAM
| MC_LineTrigLine_CAM |
|---|
|
Description The encoder trigger line is applied to the camera and transported through the SPARE downstream signal. |
IO1
| MC_LineTrigLine_IO1 |
|---|
|
Description The encoder trigger line is found on the System connector at the terminal pin Enhanced IO1. |
|
Applicability condition(s) Condition: LineTrigCtl is set to TTL. |
IO2
| MC_LineTrigLine_IO2 |
|---|
|
Description The encoder trigger line is found on the System connector at the terminal pin Enhanced IO2. |
|
Applicability condition(s) Condition: LineTrigCtl is set to TTL. |
IO3
| MC_LineTrigLine_IO3 |
|---|
|
Description The encoder trigger line is found on the System connector at the terminal pin Enhanced IO3. |
|
Applicability condition(s) Condition: LineTrigCtl is set to TTL. |
IO4
| MC_LineTrigLine_IO4 |
|---|
|
Description The encoder trigger line is found on the System connector at the terminal pin Enhanced IO4. |
|
Applicability condition(s) Condition: LineTrigCtl is set to TTL. |
ISOA1
| MC_LineTrigLine_ISOA1 |
|---|
|
Description The encoder trigger line is found on the System connector at the terminal pin ISOA1. |
|
Applicability condition(s) Condition: LineTrigCtl is set to ITTL or I12V. |
ISOA2
| MC_LineTrigLine_ISOA2 |
|---|
|
Description The encoder trigger line is found on the System connector at the terminal pin ISOA2. |
|
Applicability condition(s) Condition: LineTrigCtl is set to ITTL or I12V. |
TRA1
| MC_LineTrigLine_TRA1 |
|---|
|
Description The encoder trigger line is found on the System connector at the terminal pin pair TRA1. |
|
Applicability condition(s) Condition: LineTrigCtl is set to LVDS. |
TRA2
| MC_LineTrigLine_TRA2 |
|---|
|
Description The encoder trigger line is found on the System connector at the terminal pin pair TRA2. |
|
Applicability condition(s) Condition: LineTrigCtl is set to LVDS. |
DIN1
| MC_LineTrigLine_DIN1 |
|---|
|
Description |
|
Applicability condition(s) Condition: LineTrigCtl is set to DIFF. |
DIN2
| MC_LineTrigLine_DIN2 |
|---|
|
Description |
|
Applicability condition(s) Condition: LineTrigCtl is set to DIFF. |
DIN1_DIN2
| MC_LineTrigLine_DIN1_DIN2 |
|---|
|
Description The pair of differential input lines DIN1 and DIN2. |
|
Applicability condition(s) Condition: LineTrigCtl is set to DIFF_PAIRED. |
IIN1
| MC_LineTrigLine_IIN1 |
|---|
|
Description |
|
Applicability condition(s) Condition: LineTrigCtl is set to ISO. |
IIN2
| MC_LineTrigLine_IIN2 |
|---|
|
Description |
|
Applicability condition(s) Condition: LineTrigCtl is set to ISO. |
IIN3
| MC_LineTrigLine_IIN3 |
|---|
|
Description |
|
Applicability condition(s) Condition: LineTrigCtl is set to ISO. |
IIN4
| MC_LineTrigLine_IIN4 |
|---|
|
Description |
|
Applicability condition(s) Condition: LineTrigCtl is set to ISO. |
IIN1_IIN2
| MC_LineTrigLine_IIN1_IIN2 |
|---|
|
Description The pair of differential input lines IIN1 and IIN2. |
|
Applicability condition(s) Condition: LineTrigCtl is set to ISO_PAIRED. |
IIN3_IIN4
| MC_LineTrigLine_IIN3_IIN4 |
|---|
|
Description The pair of differential input lines IIN3 and IIN4. |
|
Applicability condition(s) Condition: LineTrigCtl is set to ISO_PAIRED. |