PC1624 Grablink Base
PC1624 Grablink Base
is delivered with two brackets: a full-height bracket and a low-profile bracket.
To install PC1624 Grablink Base in a low-profile computer, replace the existing full-height standard bracket with the low-profile bracket included in your
kit. Therefore:
|
1.
|
Unplug the flat cable from the Internal I/O connector. |
|
2.
|
Remove the original standard-profile bracket by unscrewing the screw locks of the Camera Link connector;
keep the screw locks. |
|
3.
|
Install the low-profile bracket; secure it on the board with the Camera Link connector screw locks. |
PC1167 Domino Melody
PC1167 Domino Melody
is delivered with two brackets: a full-height bracket and a low-profile bracket.
To install PC1167 Domino Melody in a low-profile computer, replace the existing full-height standard bracket with the low-profile bracket included in your
kit: If needed, first unplug the flat cable from the internal connector. Remove the original standard-profile bracket by unscrewing the screw locks;
keep the screw locks. Install the low-profile bracket; secure it on the board with the screw locks.
PC1685 Picolo PCIe
PC1685 Picolo PCIe
is delivered with two brackets: a full-height bracket and a low-profile bracket.
To install PC1685 Picolo PCIe in a low-profile computer, replace the existing full-height standard bracket with the low-profile bracket included in your
kit: If needed, first unplug the flat cable from the internal connector. Remove the original standard-profile bracket by unscrewing the screw locks;
keep the screw locks. Install the low-profile bracket; secure it on the board with the screw locks.
