PC3633 Coaxlink Quad CXP-12 3D-LLE Specifications

Mechanical

Feature name Feature value
Form factor

PCI Express card
Format

Standard profile, half length, 8-lane PCI Express card
Cooling method

Air cooling, fan-cooled heatsink
Mounting

For insertion in a standard height, 8-lane or higher, PCI Express card slot
Connectors
● 'A B C D' on card bracket:
□ 4 x Micro-BNC 75 Ohms coaxial receptacles
□ CoaXPress Host Interface
● 'EXTERNAL I/O' on card bracket:
□ 26-pin 3-row high-density D-Sub female socket with UNC4-40 jack socket screws
□ I/O lines and I/O power output
● 'INTERNAL I/O 1' on printed circuit board:
□ 26-pin 2-row 0.1" pitch pin header with shrouding
□ I/O lines and I/O power output
● 'INTERNAL I/O 2' on printed circuit board:
□ 26-pin 2-row 0.1" pitch pin header with shrouding
□ I/O lines and I/O power output
● 'I/O EXTENSION' on printed circuit board:
□ 26-pin 2-row 0.05" pitch pin header with shrouding
□ I/O extension cable socket
● 'C2C-LINK' on printed circuit board:
□ 6-pin 2-row 0.1" pitch pin header with shrouding
□ Card-to-card link
● 'AUXILIARY POWER INPUT' on printed circuit board:
□ 6-pin PEG power socket
□ 12 V DC power input for PoCXP and I/O power output
LED indicators
● 'A', 'B', 'C', 'D' on bracket:
□ Bi-color red/green LEDs
□ CoaXPress Host connector indicator
● 'FPGA STATUS LAMP' on PCB:
□ Bi-color red/green LED
□ FPGA status indicator
● 'BOARD STATUS LAMP' on PCB:
□ Bi-color red/green LED
□ Board status indicator
Switches

'RECOVERY' on PCB:

● 3-pin 1-row 0.1" header or 2-way DIP switch
● Firmware emergency recovery
Dimensions

PCB L x H: 167.65 mm x 111.15 mm [6.6 in x 4.38 in]
Weight

Net weight: 187 g [6.6 oz]

Gross weight: 287 g [10.1 oz]

Host bus

Feature name Feature value
Standard

PCI Express 3.0
Link width
● 8 lanes
● 1 lane, 2 lanes or 4 lanes with reduced performance
Link speed
● 8.0 GT/s (PCIe 3.0)
● 5.0 GT/s (PCIe 2.0) with reduced performance
Maximum payload size

512 bytes
DMA

32- and 64-bit
Peak delivery bandwidth

7,800 MB/s
Effective (sustained) delivery bandwidth

6,700 MB/s (Host PC motherboard dependent)
Power consumption

Typ. 16.7 W (3.3 W @ +3.3V, 13.4 W @ +12V), excluding camera and I/O power output

Camera / video inputs

Feature name Feature value
Camera interface standard

CoaXPress
Interface standard(s)

CoaXPress 1.0, 1.1, 1.1.1, 2.0 and 2.1
Maximum link speed

CXP-12
Maximum link width

4 connections
Camera powering

PoCXP
Connectors

Four micro-BNC 75 Ohms (also known as HD-BNC™) CXP-12
Status LEDs

One CoaXPress Host connection status LED per connection
Number of cameras

One 1- or 2- or 4-connection camera
Maximum number of cameras

1
Maximum aggregated camera data transfer rate

50 Gbps (5,000 MB/s)
Supported CXP down-connection speeds

1.25 Gbps (CXP-1), 2.5 Gbps (CXP-2), 3.125 Gbps (CXP-3), 5 Gbps (CXP-5), 6.25 Gbps (CXP-6), 10.0 Gbps (CXP-10), and 12.5 Gbps (CXP-12)
Supported CXP up-connection speeds
● Low-speed 20.83... Mbps (CXP-1 to CXP-6)
● Low-speed 41.66... Mbps (CXP-10, CXP-12)
Number of CXP data streams (per camera)

1 data stream per camera
Maximum CXP stream packet size

16,384 bytes
PoCXP (Power over CoaXPress)
● PoCXP Safe Power:
□ 17 W of 24V DC regulated power per CoaXPress connector
□ PoCXP Device detection and automatic power-on
□ Overload and short-circuit protections
● On-board 12V to 24V DC/DC converter
● A +12V power source must be connected to the AUXILIARY POWER INPUT connector using a 6-pin PEG cable
Camera types

Grayscale area-scan cameras
Camera pixel formats supported

Mono8

Area-scan camera control

Feature name Feature value
Trigger
● Precise control of asynchronous reset cameras, with exposure control.
● Support of camera exposure/readout overlap.
● Support of external hardware trigger, with optional delay and trigger decimation.
Strobe
● Accurate control of the strobe position for strobed light sources.
● Support of early and late strobe pulses.

On-board processing

Feature name Feature value
On-board memory

4 GB
Image data stream processing

Laser Line Extraction (LLE) processing core to compute the vertical position of one detected laser line along a ROI using one of the following algorithms:

● Maximum Detection algorithm
□ Maximum ROI width: 8192 pixels
□ Maximum ROI height: 65536 pixels
□ Depth map format: 16-bit unsigned integer number
□ Accuracy: 1 pixel
● 8-bit Maximum Detection algorithm
□ Maximum ROI width: 8192 pixels
□ Maximum ROI height: 256 pixels
□ Depth map format: 8-bit unsigned integer number
□ Accuracy: 1 pixel
● Peak Detection algorithm
□ Maximum ROI width: 8192 pixels
□ Maximum ROI height: 2048 pixels
□ Depth map format: UQ11.5 fixed-point unsigned number
□ Accuracy: 1/32 pixel
● High accuracy Peak Detection algorithm
□ Maximum ROI width: 8192 pixels
□ Maximum ROI height: 256 pixels
□ Depth map format: UQ8.8 fixed-point unsigned number
□ Accuracy: 1/256 pixel
● Center Of Gravity algorithm
□ Maximum ROI width: 8192 pixels
□ Maximum ROI height: 2048 pixels
□ Depth map format: UQ11.5 fixed-point unsigned number
□ Accuracy: 1/32 pixel
● High accuracy Center Of Gravity algorithm
□ Maximum ROI width: 8192 pixels
□ Maximum ROI height: 256 pixels
□ Depth map format: UQ8.8 fixed-point unsigned number
□ Accuracy: 1/256 pixel
Data stream statistics
● Measurement of:
□ Frame rate (Area-scan only)
□ Line rate
□ Data rate
● Configurable averaging interval
Event signaling and counting
● The application software can be notified of the occurrence of various events:
□ Standard event: the EVENT_NEW_BUFFER event notifies the application of newly filled buffers
□ A large set of custom events
● Custom events sources:
□ I/O Toolbox events
□ Camera and Illumination control events
□ CoaXPress data stream events
□ CoaXPress host interface events
● Each custom event is associated with a 32-bit counter that counts the number of occurrences
● The last three 32-bit context data words of the event context data can be configured with event-specific context data:
□ Event-specific data
□ State of all System I/O lines sampled at the event occurrence time
□ Value of any event counter

General Purpose Inputs and Outputs

Feature name Feature value
Number of lines

20 I/O lines:

● 4 differential inputs (DIN)
● 4 singled-ended TTL inputs/outputs (TTLIO)
● 8 isolated inputs (IIN)
● 4 isolated outputs (IOUT)

NOTE: The number of I/O lines can be extended using I/O modules attached to the I/O EXTENSION connector.
Usage
● Any I/O input lines can be used by any LIN tool of the I/O Toolbox
● Selected pairs of I/O input lines can be used by any QDC tool of the I/O toolbox to decode A/B signals of a motion encoder
Electrical specifications
● DIN: High-speed differential inputs, up to 5 MHz, compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers
● TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers
● IIN: 200 kHz isolated current-sense input with wide voltage input range up to 30V, compatible with totem-pole (push-pull) HTL drivers, 5V TTL/RS-422 differential line drivers, 5V CMOS drivers, potential free contacts, solid-state relays and opto-couplers
● IOUT: Isolated contact outputs compatible with 30V / 100mA loads

NOTE: IIN and IOUT lines provide a functional isolation grade for the circuit technical protection. It does not provide an isolation that can protect a human being from electrical shock!
Filter control
● Glitch removal filter available on all System I/O input lines
● Configurable filter delay:
□ Custom value
□ Fixed values for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns, 1 µs
□ Fixed values for IIN lines: 500 ns, 1 µs, 2 µs, 5 µs, 10 µs
Polarity control

Yes
Power output

Non-isolated, +12V, 1A, with electronic fuse protection
I/O Toolbox tools

The I/O Toolbox is a configurable interconnection of tools that generates events (usually triggers):

● Line Input tool (LIN): edge detector delivering events on rising or falling edges of any selected input line.
● Quadrature Decoder tool (QDC): a composite tool including:
□ A quadrature edge detector delivering events on selected transitions of selected pairs of input lines.
□ An optional backward motion compensator for clean line-scan image acquisition when the motion is unstable.
□ A 32-bit up/down counter for delivering a position value.
● Device Link Trigger tool (DLT): delivers an event on reception of a valid high-speed CoaXPress 2.0 connection trigger packet message from the remote device.
● User Actions Scheduler tool (UAS): to delegate the execution of 'User Actions' at a scheduled time or encoder position. Possible user actions include setting low/high/toggle any bit of the User Output Register or generation of any User Events.
● Delay tool (DEL): to delay up to 16 events from one or two I/O toolbox event sources, by a programmable time or number of motion encoder ticks (any QDC events).
● Divider tool (DIV): to generate an event every nth input events from any I/O toolbox event source.
● Multiplier/divider tool (MDV): to generate m events every d input events from any I/O toolbox event source.
● The 'Input Tools' (LIN, QDC, DLT and UAS) can be further processed by the 'Event Tools' (DEL, DIV and MDV) to generate any of the following "trigger" events:
□ The "cycle trigger" of the Camera and Illumination controller
□ The "cycle sequence trigger" of the Camera and Illumination controller
□ The "start-of-scan trigger" of the Acquisition Controller (line-scan only)
□ The "end-of-scan trigger" of the Acquisition Controller (line-scan only)
I/O Toolbox composition

8 LIN, 1 QDC, 2 DLT, 1 UAS, 2 DEL, 1 DIV, 1 MDV, 2 C2C

C2C-Link

Feature name Feature value
Description
● Accurate synchronization of the trigger and the start-of-exposure of multiple grabber-controlled area-scan cameras.
● Accurate synchronization of the start-of-cycle, start-of-scan and end-of-scan of multiple grabber-controlled line-scan cameras.
Specification
● C2C-Link synchronizes cameras connected to:
□ the same card
□ to different cards in the same PC (requires an accessory cable such as the "3303 C2C-Link Ribbon Cable" or a custom-made C2C-Link cable)
□ to different cards in different PCs (requires one "1636 InterPC C2C-Link Adapter" for each PC and one RJ 45 CAT 5 STP straight LAN cable for each adapter but the last one)
● Maximum distance:
□ 120 cm inside a PC
□ 1200 m cumulated adapter to adapter cable length
● Maximum trigger rate:
□ 2.5 MHz for configurations using a single PC, or up to 10 PCs and 100 m total C2C-Link cable length
□ 200 kHz for configurations up to 32 PCs and 1200m total C2C-Link cable length
● Trigger propagation delay from master to slave devices:
□ Less than 10 ns for cameras on the same card or on different cards in the same PC
□ Less than 265 ns for cameras on different cards in different PCs (3 PCs and 40m total C2C-Link cable length)

Software

Feature name Feature value
Driver name

eGrabber
First release

eGrabber 24.12
Current release

eGrabber 26.02
Host PC Operating System
● Microsoft Windows 11, 10, 8.1, 7 for x86-64 (64-bit) processor architecture
● Linux for x86-64 (64-bit) and AArch64 (64-bit) processor architectures
● macOS for x86-64 (64-bit) and AArch64 (64-bit) processor architectures
APIs
● EGrabber class, with C++ and .NET APIs: .NET assembly designed to be used with development environments compatible with .NET frameworks version 4.0 or higher
● GenICam GenTL producer libraries compatible with C/C++ compilers:
□ 'x86_64' dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86-64 (64-bit) applications
□ 'aarch64' dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of AArch64 (64-bit) applications
Memento supported

Yes

Environmental conditions

Feature name Feature value
Operating ambient air temperature

0°C to +55°C / +32°F to +131°F
Operating ambient air humidity

10% to 90% RH non-condensing
Storage ambient air temperature

-20°C to +70°C/ -4°F to +158°F
Storage ambient air humidity

10% to 90% RH non-condensing

Certifications

Feature name Feature value
EMC standards
● European Council EMC Directive 2014/30/EU
● United States FCC CFR Title 47 Part 15B
EMC - Emission
● EN 55032:2015 / CISPR 32:2012 Class B
● FCC CFR Title 47 Part 15B Class B
EMC - Immunity
● EN 55024:2010 / CISPR 24:2010
● EN 55035:2017 / CISPR 35:2016
● EN 61000-4-2:2009
● EN 61000-4-3:2006
● EN 61000-4-4:2004
● EN 61000-4-6:2014
KC Certification

Korean Radio Waves Act, Article 58-2, Clause 3
Flammability

PCB compliant with UL 94 V-0
RoHS

European Union Directive 2015/863 (ROHS3)
REACH

European Union Regulation 1907/2006
WEEE

Must be disposed of separately from normal household waste and must be recycled according to local regulations

Ordering information

Feature name Feature value
Product status

Released
Product code - Description

PC3633 Coaxlink Quad CXP-12 3D-LLE
Related products
● PC1625 DB25F I/O Adapter Cable
● PC1636 InterPC C2C-Link Adapter
● PC3303 C2C-Link Ribbon Cable
● PC3304 HD26F I/O Adapter Cable