I/O Lines Overview

The LineSelector feature of the Coaxlink and Grablink Duo frame grabbers Interface Modules exposes:

●

2 Standard I/O sets of 10 I/O lines named DIN**, IIN**, IOUT** and TTLIO**

●

1 Module I/O set of 40 I/O lines named MIO**

Module I/O set

I/O Line Type	I/O Line Names	Count
See note (1)	MIO1 ... MIO40	40

(1) The mix of I/O line types is defined by the attached extension.

GPIO lines per product

The number of effectively available GPIO lines is defined by the frame grabber configuration:

●

A frame grabber includes 0, 1 or 2 Standard I/O set.

●

A selection of frame grabbers with less than 2 Standard I/O set accepts one extension module with an additional Standard I/O set.

●

Frame grabbers with an I/O extension connector may accept one I/O Extension module.

The following table summarizes the capabilities:

Product	Standard I/O sets		Module I/O set
	#1	#2
PC1628 Grablink Duo	On-board	On-board	See note (3)
PC1629 Coaxlink Duo PCIe/104-EMB	See note (1)	N/A	N/A
PC1630 Coaxlink Mono	On-board	N/A	N/A
PC1631 Coaxlink Duo	On-board	On-board	N/A
PC1632 Coaxlink Quad	On-board	On-board	N/A
PC1633 Coaxlink Quad G3	On-board	On-board	N/A
PC1633-LH Coaxlink Quad G3 LH	On-board	On-board	N/A
PC1635 Coaxlink Quad G3 DF	On-board	N/A	N/A
PC1637 Coaxlink Quad 3D-LLE	On-board	On-board	N/A
PC3602 Coaxlink Octo	On-board	See note (2)	See note (3)
PC3603 Coaxlink Quad CXP-12	On-board	On-board	See note (3)
PC3603-4 Coaxlink Quad CXP-12	On-board	On-board	See note (3)
PC3620 Coaxlink Quad CXP-12 JPEG	On-board	On-board	See note (3)
PC3620-4 Coaxlink Quad CXP-12 JPEG	On-board	On-board	See note (3)
PC3621 Coaxlink Mono CXP-12	On-board	See note (2)	See note (3)
PC3621-LH Coaxlink Mono CXP-12 LH	On-board	See note (2)	See note (3)
PC3622 Coaxlink Duo CXP-12	On-board	See note (2)	See note (3)
PC3622-LH Coaxlink Duo CXP-12 LH	On-board	See note (2)	See note (3)
PC3623 Coaxlink Quad CXP-12 Value	On-board	On-board	See note (3)
PC3624 Coaxlink Quad CXP-12 DF	On-board	See note (2)	See note (3)
PC3625 Coaxlink QSFP+	On-board	On-board	See note (3)

●

(1) Attach a PC3300 HD26F I/O module for Coaxlink Duo PCIe/104 to the Extension Connector to obtain the first Standard I/O set instance.

See also: Coaxlink Duo PCIe/104 accessories in the hardware manual for more information.

●

(2) Attach one of the following I/O extension modules to the I/O extension connector:

□

PC3614 HD26F I/O Extension Module - Standard I/O Set to obtain the second Standard I/O set instance.

□

PC3618 HD26F I/O Extension Module - Fast I/O) to obtain the second Standard I/O set instance with faster IIN** isolated input lines.

See also: PC3618 HD26F I/O Extension Module - Fast I/O in the hardware manual for more information.

●

(3) Attach one of the following I/O extension modules to the I/O extension connector:

□

PC3610 HD26F I/O Extension Module - TTL-RS422 to obtain up to a configurable mix of TTL and RS422 I/O lines: the 3610/3612 Module I/O set.

□

PC3612 HD26F I/O Extension Module - TTL-CMOS5V-RS422 to obtain up to a configurable mix of TTL/CMOS5V and RS422 I/O lines: the 3610/3612 Module I/O set.

See also: PC3610 HD26F I/O Extension Module - TTL-RS422 and PC3612 HD26F I/O Extension Module - TTL-CMOS5V-RS422 in the hardware manual for more information.

Only one module can be attached to the I/O extension connector!