I/O Power Output

I/O Power Output (Version 1)

Applies to ClosedPC1628 Grablink Duo, PC1630 Coaxlink Mono, PC1631 Coaxlink Duo, PC1632 Coaxlink Quad, PC1633 Coaxlink Quad G3, PC1633-LH Coaxlink Quad G3 LH, PC1635 Coaxlink Quad G3 DF, PC1637 Coaxlink Quad 3D-LLE, PC3602 Coaxlink Octo, PC3603 Coaxlink Quad CXP-12, PC3603-4 Coaxlink Quad CXP-12, PC3620 Coaxlink Quad CXP-12 JPEG, PC3620-4 Coaxlink Quad CXP-12 JPEG, PC3621 Coaxlink Mono CXP-12, PC3621-LH Coaxlink Mono CXP-12 LH, PC3622 Coaxlink Duo CXP-12, PC3622-LH Coaxlink Duo CXP-12 LH and PC3625 Coaxlink QSFP+.

Description

A non-isolated +12 V power output is available on every I/O connector.

The power originates from an external 12 V power supply plugged into the Auxiliary Power Input connector. It is distributed from a common electronic fuse to all the I/O connectors.

The electronic fuse provides the following protections:

● Limits the inrush current during power on sequence
● Protects the frame grabber and the power source against overload
● Protects the frame grabber and the power source against short-circuits.

The sum of the load currents drawn from all the 12 V outputs of the I/O connectors must be lower or equal to the specified maximum output current.

Specification

Parameter Conditions Min. Typ. Max. Units
Aggregated output current Operating temperature range     1.0 A
Voltage drop across the electronic fuse Max. output current     0.2 V
NOTE: The above specification applies over the whole operating temperature range of the frame grabber.

I/O Power Output (Version 2)

Applies to ClosedPC3623 Coaxlink Quad CXP-12 Value, PC3624 Coaxlink Quad CXP-12 DF and PC3633 Coaxlink Quad CXP-12 3D-LLE.

A non-isolated +12 V power output is available on every I/O connector.

The power originates from an external 12 V power supply plugged into the Auxiliary Power Input connector. It is distributed from a common resettable fuse to all the I/O connectors.

The resettable fuse provides the following protections:

● Limits the inrush current during power on sequence
● Protects the frame grabber and the power source against overload
● Protects the frame grabber and the power source against short-circuits.
● The resettable fuse is a positive temperature coefficient device 1.85 A PTC.

The sum of the load currents drawn from all the 12 V outputs of the I/O connectors must be lower or equal to the specified maximum output current.

Specification

Parameter Conditions Min. Typ. Max. Units
Aggregated output current Operating temperature range     1.0 A
Voltage drop across the electronic fuse Max. output current     0.2 V
NOTE: The above specification applies over the whole operating temperature range of the frame grabber.