Hmode
Horizontal synchronization mode of the downstream process
Parameter Info
| Class | Category | Level | Type | Access |
|---|---|---|---|---|
| Channel | Grabber Configuration | EXPERT | Enumerated | Get Only |
| Num ID | String Identifier | C, C++ identifier |
|---|---|---|
| 3429 << 14 | Hmode | MC_Hmode |
Parameter Description
This parameter indicates the origin of the signal used by the downstream process of the grabber to establish the horizontal synchronization.
MultiCam assigns automatically the most appropriate value to Hmode , in conformity with the camera properties.
Parameter Values
ANALOG_LANE1
| MC_Hmode_ANALOG_LANE1 |
|---|
|
Description The downstream process is slaved to the horizontal camera scanning timing by a phase locking mechanism applied to the composite synchronization embedded in the analog video signal delivered by the camera on lane 1. |
DIGITAL_PULSED
| MC_Hmode_DIGITAL_PULSED |
|---|
|
Description The downstream process is slaved to the horizontal camera scanning timing by sensing a digital synchronizing signal provided by the camera through the line designated by HsyncLine . The digital signal embeds the horizontal synchronization only. |
LOCAL
| MC_Hmode_LOCAL |
|---|
|
Description The downstream process is slaved to a horizontal synchronizing signal derived from the local upstream controller. The camera cable length can be compensated with CableComp . |
DIGITAL_MIXED
| MC_Hmode_DIGITAL_MIXED |
|---|
|
Description The downstream process is slaved to the horizontal camera scanning timing by sensing a digital synchronizing signal provided by the camera through the line designated by CsyncLine . The digital signal embeds both horizontal and vertical synchronization. |