Multiple Cycle Timings

Applies to the following firmware variants of Closed1633 Coaxlink Quad G3, 1633-LH Coaxlink Quad G3 LH, 3602 Coaxlink Octo, 3603 Coaxlink Quad CXP-12, 3603-4 Coaxlink Quad CXP-12, 3620 Coaxlink Quad CXP-12 JPEG, 3620-4 Coaxlink Quad CXP-12 JPEG, 3623 Coaxlink Quad CXP-12 Value, 3624 Coaxlink Quad CXP-12 DF and 3625 Coaxlink QSFP+.

(1-camera)

(1-camera), (1-camera, custom-logic), (2-camera), (3-camera), (4-camera), (5-camera), (5-camera, 5D22211), (6-camera), (8-camera)

(1-camera), (1-camera, custom-logic), (2-camera), (2-camera, custom-logic), (4-camera), (4-camera, custom-logic)

(4-camera)

(1-camera), (2-camera), (4-camera)

(1-camera), (1-df-camera)

(1-camera), (1-camera, custom-logic)

In the Cycle Timing Category of the Device Module, the CycleTimingSelector parameter acts as a selector for ExposureTime, StrobeDelay and StrobeDuration.

The CIC of above listed firmware variants allows to define up to 16 different timing sets!

By default, CycleTimingSelector = 1.

To activate the multiple cycle timings feature, set the CycleTimingCount parameter to any value between 2 and 16 according to the number of cycle timings to be executed.

The CIC uses successively and repeatedly the different timing definitions starting with index 0 up to the value of CycleTimingCount -1.

See also: Multiple Timings Example for more explanations and timing diagrams.