Multi-tap CoaXPress Cameras

Applies to the following firmware variants of Closed3603 Coaxlink Quad CXP-12, 3603-4 Coaxlink Quad CXP-12, 3623 Coaxlink Quad CXP-12 Value, 3624 Coaxlink Quad CXP-12 DF and 3625 Coaxlink QSFP+.

(1-camera)

(1-camera)

(1-camera), (1-df-camera)

(1-camera)

1X_2YE geometry

Multi-tap is controlled through the following GenApi features of the MultiTapControl category of the Coaxlink Data Stream module:

● DeviceTapGeometry: Image scan format. Supported values:
□ 1X_1Y: Single tap. Default value.
□ 1X_2YE: Two zones across vertical direction, pixel extractors at both top and bottom lines.
● Image1StreamID: Stream ID of first tap (ignored when DeviceTapGeometry is Geometry_1X_1Y).
● Image2StreamID: Stream ID of second tap (ignored when DeviceTapGeometry is Geometry_1X_1Y).

See also: Transmission Methods of 1X_2YE Images (Coaxlink series)