Image Width Increment Step (Coaxlink series)
The width of the image delivered by the camera must be a multiple of the Image Width Increment Step.
The Image Width Increment Step depends on:
□ | the camera Pixel Format |
□ | the Line Pitch Alignment - LPA - : the smallest number of bytes that the data stream chain can align |
The following table shows the Image Width Increment Step vs. the camera Pixel Format for all possible LPA values:
Pixel Format |
Bytes/pixel |
Image Width Increment Step [Pixels] | |||
---|---|---|---|---|---|
LPA=4 | LPA=8 | LPA=16 | LPA=32 | ||
Mono8 or Bayer8 |
1 | 4 | 8 | 16 | 32 |
Mono10-/12-/14-/16 or Bayer10-/12-/14-/16 |
2 | 2 | 4 | 8 | 16 |
RGB8 | 3 | 4 | 8 | 16 | 32 |
RGBA8 |
4 | 1 | 2 | 4 | 8 |
RGB10-/12-/14-/16 | 6 | 2 | 4 | 8 | 16 |
RGBA10-/12-/14-/16 | 8 | 1 | 1 | 2 | 4 |
LPA values
The LPA values depends on the selected product/firmware variant and the usage of the pixel processing:
Values of LPA when the FFC, CFA, JPEG and BIN processing elements are not used
LPA | Applicable product/firmware variants |
---|---|
4 |
|
8 |
|
16 |
|
Values of LPA when the FFC corrector is active
Step | Applicable product/firmware variants |
---|---|
16 |
|
32 |
|
Values of LPA when the CFA decoder is active
LPA | Applicable product/firmware variants |
---|---|
16 |
|
32 |
|
Values of LPA when the JPEG encoder is active
LPA | Applicable product/firmware variants |
---|---|
32 |
|
Values of LPA for CustomLogic firmware variants
LPA | Applicable product/firmware variants |
---|---|
8 |
|
32 |
|
Values of Image Width Increment Step when the BIN element is active
See also: Limitations