1633-LH Coaxlink Quad G3 LH
| Property description | Property value |
|---|---|
| General properties | |
| Product code and name | 1633-LH Coaxlink Quad G3 LH |
| Board and bracket layout | 1633 Coaxlink Quad G3
|
| Serial nr. prefix | KQH |
| Documentation package | eGrabber |
| Documentation section | Coaxlink series mini-site |
| Product driver | eGrabber |
| Product series | Coaxlink |
| Product sub-series | CXP-6 |
| Product group | 1633 |
| Product class | Frame Grabber |
| First release | Coaxlink 11.1 |
| Frame Grabber properties | |
| PCI Express card profile | Standard |
| PCI interface type | 4-lanes PCI Express Gen3 |
| PCIe standard compliance deviation | PCIe standard compliance deviation - Operate only at PCIe 2.0 and PCIe 3.0 link speeds |
| On-board memory capacity [Megabyte] | 1024 |
| Camera Interface properties | |
| Camera interface standard | CoaXPress |
| Camera interface physical layer | CoaXPress CXP-6 |
| Camera interface connector(s) type | DIN-4 |
| Camera powering standard | PoCXP |
| Electrical properties | |
| Power distribution scheme | 1633 Coaxlink Quad G3 and 1633-LH Coaxlink Quad G3 LH
|
| Auxiliary 12 V power input usage | 4 POCXP + I/O power output |
| GPIO Power output type | GPIO Power output type 1 |
| PoCXP voltage regulation | 12V/24V DC/DC converter |
| PCI Express +3.3 V typical input power [Watt] | 3.8 |
| PCI Express +12 V typical input power [Watt] | 13 |
| GPIO properties | |
| Number of standard GPIO sets | 2 |
| Differential input lines type | Version 1 |
| TTL input/output lines type | Version 1 |
| Isolated input lines type | Version 1 (50 kHz) |
| Isolated output lines type | Standard |
| Mechanical properties | |
| Cooling method | Fanless heatsink |
| Dimensions [mm] | 167,65 x 111,15 |
| Dimensions [in] | 6,6 x 4,38 |
| Gross weight [kg] | 0.361 |
| Net weight [kg] | 0.26 |
| Connectors properties | |
| Camera connector instance | CoaXPress Host Connector - DIN 4
|
| External I/O connector instance | External I/O Connector
|
| Internal I/O connector instance | Internal I/O 1 Connector
|
| Second internal I/O connector instance | Internal I/O 2 Connector
|
| C2C-Link connector instance | C2C-Link Connector
|
| Power connector | Auxiliary Power Input Connector for PoCXP and GPIO
|
| Environmental properties | |
| Storage conditions | Standard |
| Operating conditions | Standard 0°C-55°C | 80°C max FPGA temperature | 250 lfm min. airflow |
| Estimated heat power (No camera power delivery) [W] | 16.8 |
| Estimated PoCL/PoCXP DC-DC heat power loss [W] | 5.5 |
| Estimated heat power (With max. camera power delivery) [W] | 22.3 |
| EMC compliance for Europe | EN55022/32 Class B emission | EN55024/35 immunity |
| EMC compliance for US | Class B emission |
| KC registration number | MSIP-REM-EUr-PC1633 |
| REACH compliance | EU REACH Regulation (EC) No 1907/2006 |
| RoHS compliance | EU/2015/863 (RoHS) of the 2011/65/EU directive |
| Indicators properties | |
| Camera interface LEDs | CoaXPress LED's on bracket |
| Accessories properties | |
| 1625 DB25F I/O Adapter Cable | Compatible |
| 1636 InterPC C2C-Link Adapter | Compatible |
| 1636 InterPC C2C-Link Adapter for Inter-PC C2C-link extension purpose | Compatible |
| 1636 InterPC C2C-Link Adapter for HD26F I/O adapter purpose | Compatible |
| 1636 InterPC C2C-Link Adapter for HD26F I/O adapter purpose with Internal I/O2 | Compatible |
| 3303 C2C-Link Ribbon Cable | Compatible |
| 3304 HD26F I/O Adapter Cable | Compatible |
| 3304 HD26F I/O Adapter Cable on Internal IO2 connector | Compatible |
Coaxlink Quad G3 (1-camera) specific properties
| Property description | Property value |
|---|---|
| General properties | |
| Firmware variant name | Coaxlink Quad G3 (1-camera) |
| Firmware variant tag: camera count | 1-camera |
| Firmware variant tag: camera type | Area-scan |
| Camera Interface properties | |
| HCMAP (Host Connection MAP) | 1D4 |
| HCMAP description | One 1- or 2- or 4-connection |
| HCMAP - Device count field | 1 |
| HCMAP - Connection(s) per device field | 4C |
| HCMAP - Stream count field | 1S |
| Pixel Processing properties | |
| Flat-field correction pixel processing | Available |
| Lookup-table pixel processing | Available |
| CFA decoding method 1 | Available |
| CFA decoding method 2 | Available |
| CFA peak pixel processing rate per stream | 1,108,000,000 pixels/s |
| CFA maximum line length [pixels] | 16384 |
| I/O Toolbox properties | |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 1 |
| I/O toolbox Multiplier/Divider tools count | 1 |
| I/O toolbox C2C-Link Synchronization tools count | 2 |
| Acquisition properties | |
| Image acquisition type | Area-scan |
| Buffer filling rule | Discard remaining data |
| On-board memory partition scheme | One device, two partitions per device: 'FFC coefficients' and 'Image data' |
| Maximum number of CIC cycle timings | 16 |
| Default width-increment step [Byte] | 4 |
| Width-increment step when CFA decoder is active [Byte] | 16 |
| Width-increment step when FFC corrector is active [Byte] | 16 |
Coaxlink Quad G3 (1-camera, 4-data-stream) specific properties
| Property description | Property value |
|---|---|
| General properties | |
| Firmware variant name | Coaxlink Quad G3 (1-camera, 4-data-stream) |
| Firmware variant tag: camera count | 1-camera, 4-data-stream |
| Firmware variant tag: camera type | Area-scan |
| Camera Interface properties | |
| HCMAP (Host Connection MAP) | 1D4 |
| HCMAP description | One 1- or 2- or 4-connection |
| HCMAP - Device count field | 1 |
| HCMAP - Connection(s) per device field | 4C |
| HCMAP - Stream count field | 4S |
| I/O Toolbox properties | |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 1 |
| I/O toolbox Multiplier/Divider tools count | 1 |
| I/O toolbox C2C-Link Synchronization tools count | 2 |
| Acquisition properties | |
| Image acquisition type | Area-scan |
| Buffer filling rule | Discard remaining data |
| On-board memory partition scheme | Four data streams, one 'Image data' partition per data stream |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
| Multi-stream acquisition | Up to 4 data streams |
Coaxlink Quad G3 (1-camera, line-scan) specific properties
| Property description | Property value |
|---|---|
| General properties | |
| Firmware variant name | Coaxlink Quad G3 (1-camera, line-scan) |
| Firmware variant tag: camera count | 1-camera, line-scan |
| Firmware variant tag: camera type | Line-scan |
| Camera Interface properties | |
| HCMAP (Host Connection MAP) | 1D4 |
| HCMAP description | One 1- or 2- or 4-connection |
| HCMAP - Device count field | 1 |
| HCMAP - Connection(s) per device field | 4C |
| HCMAP - Stream count field | 1S |
| Pixel Processing properties | |
| Flat-field correction pixel processing | Available |
| Lookup-table pixel processing | Available |
| I/O Toolbox properties | |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 1 |
| I/O toolbox Multiplier/Divider tools count | 1 |
| I/O toolbox C2C-Link Synchronization tools count | 3 |
| Acquisition properties | |
| Image acquisition type | Line-scan |
| Buffer filling rule | Continue into a new buffer |
| On-board memory partition scheme | One device, one 'Image data' partition |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
| Width-increment step when FFC corrector is active [Byte] | 16 |
Coaxlink Quad G3 (1-slm-camera) specific properties
| Property description | Property value |
|---|---|
| General properties | |
| Firmware variant name | Coaxlink Quad G3 (1-slm-camera) |
| Firmware variant tag: camera count | 1-slm-camera |
| Firmware variant tag: camera type | Area-scan |
| Camera Interface properties | |
| HCMAP (Host Connection MAP) | 1D8SLM4 |
| HCMAP description | Master 4-connection sub-link of an 8-connection |
| HCMAP - Device count field | 1 |
| HCMAP - Connection(s) per device field | 4of8C |
| HCMAP - Stream count field | 1S |
| Pixel Processing properties | |
| Lookup-table pixel processing | Available |
| I/O Toolbox properties | |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 1 |
| I/O toolbox Multiplier/Divider tools count | 1 |
| I/O toolbox C2C-Link Synchronization tools count | 2 |
| Acquisition properties | |
| Image acquisition type | Area-scan |
| Buffer filling rule | Discard remaining data |
| On-board memory partition scheme | One device, one 'Image data' partition |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
| Sub-link acquisition | Available |
Coaxlink Quad G3 (1-sls-camera) specific properties
| Property description | Property value |
|---|---|
| General properties | |
| Firmware variant name | Coaxlink Quad G3 (1-sls-camera) |
| Firmware variant tag: camera count | 1-sls-camera |
| Firmware variant tag: camera type | Area-scan |
| Camera Interface properties | |
| HCMAP (Host Connection MAP) | 1D8SLS4 |
| HCMAP description | Slave 4-connection sub-link of an 8-connection |
| HCMAP - Device count field | 1 |
| HCMAP - Connection(s) per device field | 4of8C |
| HCMAP - Stream count field | 1S |
| Pixel Processing properties | |
| Lookup-table pixel processing | Available |
| I/O Toolbox properties | |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 1 |
| I/O toolbox Multiplier/Divider tools count | 1 |
| I/O toolbox C2C-Link Synchronization tools count | 3 |
| Acquisition properties | |
| Image acquisition type | Area-scan |
| Buffer filling rule | Discard remaining data |
| On-board memory partition scheme | One device, one 'Image data' partition |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
| Sub-link acquisition | Available |
Coaxlink Quad G3 (2-camera) specific properties
| Property description | Property value |
|---|---|
| General properties | |
| Firmware variant name | Coaxlink Quad G3 (2-camera) |
| Firmware variant tag: camera count | 2-camera |
| Firmware variant tag: camera type | Area-scan |
| Camera Interface properties | |
| HCMAP (Host Connection MAP) | 2D22 |
| HCMAP description | One or two 1- or 2-connection |
| HCMAP - Device count field | 2 |
| HCMAP - Connection(s) per device field | 2C |
| HCMAP - Stream count field | 1S |
| Pixel Processing properties | |
| Lookup-table pixel processing | Available |
| CFA decoding method 3 | Device0 only |
| CFA decoding method 5 | Available on Device0 only |
| CFA peak pixel processing rate per stream | 1,000,000,000 pixels/s |
| CFA maximum line length [pixels] | 8192 |
| I/O Toolbox properties | |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 2 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 2 |
| I/O toolbox Multiplier/Divider tools count | 2 |
| I/O toolbox C2C-Link Synchronization tools count | 2 |
| Acquisition properties | |
| Image acquisition type | Area-scan |
| Buffer filling rule | Discard remaining data |
| On-board memory partition scheme | Two devices, one 'image data' partition per device |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
Coaxlink Quad G3 (2-camera, bayer) specific properties
| Property description | Property value |
|---|---|
| General properties | |
| Firmware variant name | Coaxlink Quad G3 (2-camera, bayer) |
| Firmware variant tag: camera count | 2-camera, bayer |
| Firmware variant tag: camera type | Area-scan |
| Camera Interface properties | |
| HCMAP (Host Connection MAP) | 2D22 |
| HCMAP description | One or two 1- or 2-connection |
| HCMAP - Device count field | 2 |
| HCMAP - Connection(s) per device field | 2C |
| HCMAP - Stream count field | 1S |
| Pixel Processing properties | |
| CFA decoding method 3 | Available |
| CFA decoding method 5 | Available |
| CFA peak pixel processing rate per stream | 1,000,000,000 pixels/s |
| CFA maximum line length [pixels] | 8192 |
| I/O Toolbox properties | |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 1 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| Acquisition properties | |
| Image acquisition type | Area-scan |
| Buffer filling rule | Discard remaining data |
| On-board memory partition scheme | Two devices, one 'image data' partition per device |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
Coaxlink Quad G3 (2-camera, line-scan) specific properties
| Property description | Property value |
|---|---|
| General properties | |
| Firmware variant name | Coaxlink Quad G3 (2-camera, line-scan) |
| Firmware variant tag: camera count | 2-camera, line-scan |
| Firmware variant tag: camera type | Line-scan |
| Camera Interface properties | |
| HCMAP (Host Connection MAP) | 2D22 |
| HCMAP description | One or two 1- or 2-connection |
| HCMAP - Device count field | 2 |
| HCMAP - Connection(s) per device field | 2C |
| HCMAP - Stream count field | 1S |
| Pixel Processing properties | |
| Lookup-table pixel processing | Available |
| I/O Toolbox properties | |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 2 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 2 |
| I/O toolbox Multiplier/Divider tools count | 2 |
| I/O toolbox C2C-Link Synchronization tools count | 3 |
| Acquisition properties | |
| Image acquisition type | Line-scan |
| Buffer filling rule | Continue into a new buffer |
| On-board memory partition scheme | Two devices, one 'image data' partition per device |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
Coaxlink Quad G3 (3-camera) specific properties
| Property description | Property value |
|---|---|
| General properties | |
| Firmware variant name | Coaxlink Quad G3 (3-camera) |
| Firmware variant tag: camera count | 3-camera |
| Firmware variant tag: camera type | Area-scan |
| Camera Interface properties | |
| HCMAP (Host Connection MAP) | 3D211 |
| HCMAP description | One 1- or 2-connection and one or two 1-connection |
| HCMAP - Device count field | 3 |
| HCMAP - Connection(s) per device field | 2C, 1C |
| HCMAP - Stream count field | 1S |
| Pixel Processing properties | |
| Lookup-table pixel processing | Available |
| I/O Toolbox properties | |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 2 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 2 |
| I/O toolbox Divider tools count | 2 |
| I/O toolbox Multiplier/Divider tools count | 2 |
| I/O toolbox C2C-Link Synchronization tools count | 2 |
| Acquisition properties | |
| Image acquisition type | Area-scan |
| Buffer filling rule | Discard remaining data |
| On-board memory partition scheme | Three devices, one 'Image data' partition per device |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
Coaxlink Quad G3 (4-camera) specific properties
| Property description | Property value |
|---|---|
| General properties | |
| Firmware variant name | Coaxlink Quad G3 (4-camera) |
| Firmware variant tag: camera count | 4-camera |
| Firmware variant tag: camera type | Area-scan |
| Camera Interface properties | |
| HCMAP (Host Connection MAP) | 4D1111 |
| HCMAP description | One or two or three or four 1-connection |
| HCMAP - Device count field | 4 |
| HCMAP - Connection(s) per device field | 1C |
| HCMAP - Stream count field | 1S |
| Pixel Processing properties | |
| Lookup-table pixel processing | Available |
| I/O Toolbox properties | |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 4 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 4 |
| I/O toolbox Divider tools count | 4 |
| I/O toolbox Multiplier/Divider tools count | 4 |
| I/O toolbox C2C-Link Synchronization tools count | 2 |
| Acquisition properties | |
| Image acquisition type | Area-scan |
| Buffer filling rule | Discard remaining data |
| On-board memory partition scheme | Four devices, one 'Image data' partition per device |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |
Coaxlink Quad G3 (4-camera, line-scan) specific properties
| Property description | Property value |
|---|---|
| General properties | |
| Firmware variant name | Coaxlink Quad G3 (4-camera, line-scan) |
| Firmware variant tag: camera count | 4-camera, line-scan |
| Firmware variant tag: camera type | Line-scan |
| Camera Interface properties | |
| HCMAP (Host Connection MAP) | 4D1111 |
| HCMAP description | One or two or three or four 1-connection |
| HCMAP - Device count field | 4 |
| HCMAP - Connection(s) per device field | 1C |
| HCMAP - Stream count field | 1S |
| Pixel Processing properties | |
| Lookup-table pixel processing | Available |
| I/O Toolbox properties | |
| I/O toolbox Line Input tools count | 8 |
| I/O toolbox Quadrature Decoder tools count | 4 |
| I/O toolbox User Actions Scheduler tools count | 1 |
| I/O toolbox Delay tools count | 4 |
| I/O toolbox Divider tools count | 4 |
| I/O toolbox Multiplier/Divider tools count | 4 |
| I/O toolbox C2C-Link Synchronization tools count | 3 |
| Acquisition properties | |
| Image acquisition type | Line-scan |
| Buffer filling rule | Continue into a new buffer |
| On-board memory partition scheme | Four devices, one 'Image data' partition per device |
| Maximum number of CIC cycle timings | 1 |
| Default width-increment step [Byte] | 4 |